Stainless Steel, Steel and Aluminium Welding and Fabrication

Precision Water Jet Cutting

Steel Manufacturing of Maintenance Stair & Platform

Maintenance Stair and Platform

This was designed to enable easy access for maintenance on a production line instead of using ladders. We went to the site and met with the customer to discuss the work in detail. We took measurements, converted our sketch and measurements to a CAD and fabrication drawing. Checks were made by the customer and they confirmed that this work fell into EX2 level CE marking. As a fully accredited CE Marking company we are used to dealing with such demands and could easily accommodate the job. We had previously carried out similar work to a high standard. This job took 2 weeks to complete and was fully installed and checked onsite.

The materials we ordered came through our ISO systems, S355 steel was required, bandsaw, punch, guillotine and our qualified welder. The customer came halfway through the build to check the heights and clearances and to inspect the quality of the work. In addition to the manufacture of the stair and platform the customer also confirmed the colour of the paint and paint type. This was 2 pack epoxy. Our dedicated spray booth was required for this work.

For this one job everything was done in our Newton Abbot facility. If you require similar work then look no further than RB Engineering.

Steel Stair and Platform2

Steel Stair and Platform

Steel Stair and Platform 2

Steel Stair and Platform

 

Comments are closed.